• B250/208 6" BRUSH
• B250/207 12" BRUSH
  
  Heavy duty alloy wire brush allow you to sweep clean your cremation chamber. Our brushes cause less abrasion on floors and walls than rakes, extending the life of your refractory. 12" wide is standard size; 6" wide size is available for harder to fit spaces. connects to 1/2" pipe thread or 3/8" conduit, available from local hardware stores.
  (Handle sold separately)

SPECIFICATIONS:

6" Brush.......6"W x 3"H
12" Brush......12"W x 3"H

HANDLES

• A150/204
  
  Stoking Tool 5" W X 3-1/2" H

RAKE CLEAN-OUT TOOL

• A150/205
  Rake Head 12 '" W x 2" H

HANDLES

(NOT SHOWN)

• A150/205 10" Handle

• A150/206 4" Handle
  Grip 5" W x 3/4" Diam.

• B250/261
  

By moving the wand over remains within 1.5" to 2", a distinctive alert signal will sound if conductive metal is present and the the wand's red indicator light will illuminate.

SPECIFICATIONS:
Operating Frequency...95 kHz
Audio Frequency.........2kHz warble
Voltage......................6.8 to 10 VDC
Current......................5 ma. typical
Dimensions................16.5" L x 3.25" W x 1.75" D
Weight......................17 oz.

• C250/202

Our hand magnet offers a quick and effective means of culling ferrous metal fragments from cremated remains. Its smooth side surfaces allow it to easily burrow into loose materials. A fingertip pull on the release bar retracts the magnet, releasing the metal.

SPECIFICATIONS:

Pickup Capacity...........1-2 lbs.
Height........................9-1/4"
Length.......................4-3/4"
Width........................1-5/8"
Weight......................2-3/4 lbs.